Brake Pads'Specification：



Model No:D905

Width : 108.5mm

Height : 48mm
Thickness : 16.5mm
Material:Ceramic


Vehicle:
Nissin



Features&Benefit:

1.The brake pads have a special brake in coating applied to the pad surface to help with the bedding in process,it can take up less miles before the pads are at their best. The coating are imported,and it is the best coating in the industry so far.

2.Custom-fit to directly replace your factory pads.

3.Center-line slot, chamfered edges and factory-fitted shims ensure silent stops.

4.heat treatment reducing the heat fade.

5.Black powder-coating safeguards against rust.





Why need to brake in brake pad?

After replacing the brake pads, if you feel that the brakes are soft, you must step on the brakes to eliminate the gap between the brake pads and the brake disc. It takes 200 kilometers to achieve the best braking effect. Try to drive to a place with good road conditions and few cars. The running-in method of the new brake pads is to use fractional point brakes to brake as much as possible, and do not use sudden brakes before running-in well.



How do the new brake pads break in?

1. Lightly step on the brakes and brake with moderate force to reduce the vehicle speed to about 10-20 km/h. There is no need to keep an eye on the speedmeter, just keep your eyes on the road and make sure you notice the road.

2. Loosen the brake and drive for a few kilometers to cool the brake pad temperature slightly. However, do not brake until the vehicle stops, otherwise the brake pad material is integrated into the brake disc, which will cause brake vibration.

3. Repeat at least 10 braking cycles



Brake pads must choose the products of regular manufacturers. Inferior brake pads will not only affect the braking effect, but also cause damage to the brake disc.



FAQ:

1.What certifications do you have?

Our factury has passed ISO/TS16949 issued by TUV Rheinland in 2002, we are the first factury with such certification then. We also have more than 300kinds of products with Emark certification.



2. Can you develop brake pads according to clients' sample?

Yes, we can. If your order quantity can reach 1000sets/model, then we can open mould for u for free.

If you have many items,then we can make for you with min500sets/model.



3. How many brake pads can be packed in a 20'GP?

It's about 15000sets for a 20'GP.
http://www.shikingbrakes.com