| Moonlight Fangs http://moonlight-fangs.de/ |
|
| How do you replace the polarizer in a true color LCD industr http://moonlight-fangs.de/viewtopic.php?f=14&t=38197 |
Seite 1 von 1 |
| Autor: | JiratTanti [ Sa 18. Sep 2021, 10:37 ] |
| Betreff des Beitrags: | How do you replace the polarizer in a true color LCD industr |
True color LCD industrial screens are prone to a variety of failures during normal operation, particularly when the display installation is of a low quality. In this article, we'll discuss how to deal with water ingress in true color LCD manufacturer industrial screens. 1. As soon as water enters the filter, the appropriate actions should be taken as soon as possible. 2. Remove the water inlet filter and dry it as soon as possible. The LED bulb may be damaged if the floodlight screen is placed in the flight case. 4. Check to see if there is any water in the flight case. 5. If the screen body is not treated immediately after the water has entered, the stability of the screen body may be compromised, and dead lights may be discovered when the power is aging. 6. The flow of information into the true color square LCD industrial display. If the car body is trapped in the bellows for more than 72 hours, there is little or no value in repairing it. Please exercise caution when handling. The emergency treatment plan outlined above is intended to address the water ingress problem on the display screen. Suitable for any LED display of any size. https://twitter.com/STONE_HMI/status/1435462666596802560 https://twitter.com/STONE_HMI/status/1437432908969558021 https://twitter.com/STONE_HMI/status/1437402705669013511 |
|
| Seite 1 von 1 | Alle Zeiten sind UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|