Alle Zeiten sind UTC




Ein neues Thema erstellen Auf das Thema antworten  [ 1 Beitrag ] 
Autor Nachricht
 Betreff des Beitrags: For metal parts there are a variety of options available inc
Ungelesener BeitragVerfasst: Fr 19. Nov 2021, 01:10 
Offline

Registriert: Mi 5. Mai 2021, 06:38
Beiträge: 61
In order to effectively combine metal 3D printing with Wire EDM Parts How Does 3D Printing Work, it is necessary to recognize and understand the commonalities and differences that each process possesses, as well as how to best utilize these differences and commonalities to your advantage, prior to attempting to combine the two processes.


https://www.youtube.com/watch?v=f-zsGd2yqw8Aware of, and appreciative of, both the positive and negative aspects of metal manufacturing

Every aspect of the relationship between CNC cnc milling part and Direct Metal Laser Sintering (DMLS), the leading technology for 3D printing complex metal parts, exemplifies this better than any other aspect of manufacturing. Although the latter process, which requires nothing more than a laser beam and a pile of metal powder to create virtually any part shape, is a time-consuming process that can take several hours, it is a viable alternative. On the other hand, machining allows for the production of parts at significantly faster speeds. In comparison to other processes, cnc machining manufacturer is more restricted in terms of geometry. Both of the following considerations need to be taken into account when determining which one to use:There are two questions to consider: A) whether the part or parts in question can be machined; and B) how many parts are required to be manufactured.

There are numerous situations in which the two manufacturing processes can be used in conjunction with one another. What are some examples of this in the real world? For metal-based additive manufacturing, it is common for the process to rely on its subtractive counterpart in order to complete the task successfully. Drilling or reaping holes in metal, tapping or milling critical surfaces, milling, turning, or grinding critical surfaces are all necessary steps in the sizing process of critical surfaces. Three-dimensionally printed parts must be cleaned, sandblasted, and brackets removed before they can be used, which means that they must be taken to a machine shop at the very least for repair.

As a result, this information will be useful to those who are looking for the most efficient method of producing functional prototypes and small quantities of end-use metal components. In fact, quite a bit, to be honest. It is possible to benefit from the best of both worlds when metal 3D printing and machining are performed as separate steps within the same manufacturing process. You can avoid surprises, lower costs, and improve part design by using this approach, which is becoming increasingly popular. Continue reading to find out more. In order to properly prepare for your next metal part design project, you should think about the following set of design considerations:

Rather than cutting metal parts, it is preferable to construct metal parts from scratch

Accordingly, as stated at the outset of this design tip, it is critical to maintain strict control over the manufacturing processes that are used to create them. DMLS is the only additive manufacturing technology used at junying that prints with metal filament, making it unique in the industry. Junying Technology Corporation employs five additive manufacturing technologies, the most prominent of which is 3D printing. To fuse flour-sized grains of metal powder into the build chamber of the machine, the same as with any other powder bed printing process, a laser (or a series of lasers) is used in the same way as with any other powder bed printing process. Each layer of the paper-thin workpiece is fused together in a single continuous pass by the machine, with a coating blade drawing fresh powder across the top of the workpiece after each pass until the part is completed.


Nach oben
 Profil  
 
Beiträge der letzten Zeit anzeigen:  Sortiere nach  
Ein neues Thema erstellen Auf das Thema antworten  [ 1 Beitrag ] 

Alle Zeiten sind UTC


Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 0 Gäste


Du darfst keine neuen Themen in diesem Forum erstellen.
Du darfst keine Antworten zu Themen in diesem Forum erstellen.
Du darfst deine Beiträge in diesem Forum nicht ändern.
Du darfst deine Beiträge in diesem Forum nicht löschen.
Du darfst keine Dateianhänge in diesem Forum erstellen.

Suche nach:
Gehe zu:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | made by psd-resources.de
Deutsche Übersetzung durch phpBB.de